subject
Engineering, 17.04.2020 00:52 johnkings140

The following information is provided for the initial mix design: Cement = 700 lbs Coarse Aggregate (OD) = 1,710 lbs Absorption = 1.0% Moisture Content = 1.90% Fine Aggregate (OD) = 1,170 lbs Absorption = 0.90% Moisture Content = 5.0% Water = 294 lbs 1. Calculate the adjusted coarse aggregate batch weight? 2. Calculate the adjusted fine aggregate batch weight? 3. Calculate the adjusted water batch weight: 4. The

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 03.07.2019 19:30
When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line
Answers: 3
question
Engineering, 03.07.2019 23:20
Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct
Answers: 3
question
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
You know the right answer?
The following information is provided for the initial mix design: Cement = 700 lbs Coarse Aggregat...
Questions
Questions on the website: 13722363