Engineering, 17.04.2020 00:02 hugo211

The compound reverted gear train below is to be designed as a speed increaser to provide a total increase speed exactly 45 to 1. With a normal pressure angle of 20°, specify the appropriate numbers of teeth to minimize the gearbox size while avoiding interference of the teeth. The gears have a helix angle of 30° and full-depth teeth. Assume a constant diametral pitch in both stages. If possible, try to ensure that the input and output shafts are aligned.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]

Answers: 1

Answer

Engineering, 04.07.2019 19:10

Air inially occupying a volume of 1 m2 at 100 kpa, 27 c undergoes three internally reversible processes in series. process 1-2 compression to 500 kpa during which pv constant process 2-3 adiabatic expanslon to 100 kpa process 3-1: constant-pressure expansion to 100 kpa (a) calculate the change of entropy for each of the three processes. (b) calculate the heat and work involved in each process. (c) is this cycle a power cycle or refrigeration cycle?

Answers: 3

Answer

Engineering, 06.07.2019 04:30

Describe briefly, the concept of mass production in modern industrial system.

Answers: 1

Answer

You know the right answer?

The compound reverted gear train below is to be designed as a speed increaser to provide a total inc...

Questions