subject
Engineering, 17.04.2020 00:03 BlueExorcistReaper

An air conditioner must maintain a computer laboratory at 18°C when the outside temperature is 30°C. The thermal load that must be removed from the room consists of heat transfers entering through the walls and roof of the laboratory at a rate of 75,000 kJ/h and from the computers, lighting, and occupants at a rate of 15,000 kJ/h. (a) Determine the maximum theoretical coefficient of performance and the corresponding minimum theoretical power required by the air conditioner, in kW (Ans: COPR, max = 24.25; W min = 1.03 kW;) (b) If the actual power required by the air conditioner for this duty is 8.3 kW, determine the coefficient of performance. (Ans: COPR = 3.01) (c) If the given temperature and thermal load are observed for a total of 100 hours and electricity costs are 13 cents per kW-h, determine the cost, in $, over that period for each of cases (a) and (b). (Ans: case (a), cost = $ 13.4; case (b), cost = $ 107.9)

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
question
Engineering, 04.07.2019 18:10
Different types of steels contain different elements that alter the characteristics of the steel. for each of the following elements, explain what the element does when alloyed with steel.
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
question
Engineering, 04.07.2019 19:10
Afoot bridge is made as a simple deck, 4 m long, with a cross section 2 m (wide) and 20 cm thick, and made of wood. the deck is supported at the two ends. the maximum load allowable on the bridge is 10 tons, provided it is uniformly distributed on the deck. to sense this load, a strain gauge is placed at the center of the bridge and its resistance is monitored. if the sensor has a nominal resistance of 350 s2 and a gauge factor of 3.6, what is the reading of the strain gauge at maximum load? the modulus of elasticity for the wood used in the construction is 10 gpa.
Answers: 2
You know the right answer?
An air conditioner must maintain a computer laboratory at 18°C when the outside temperature is 30°C....
Questions
question
Biology, 05.01.2021 23:00
question
Social Studies, 05.01.2021 23:00
question
Mathematics, 05.01.2021 23:00
question
Mathematics, 05.01.2021 23:00
question
Mathematics, 05.01.2021 23:00
Questions on the website: 13722362