Engineering, 16.04.2020 23:04 NehemiahPate2006

On a piece of paper, sketch the x-y stress state and the properly oriented principal stress state. Use the resulting sketch to answer the questions in the subsequent parts of this GO exercise.(a) The angle -4.45° locates a principal stress plane. Give the stress value including sign if any.(b) The angle 85.6° locates the other in-plane principal stress plane. Give the stress value including sign if any.(c) What stress or stresses occur on a plane at 40.6°? Give the stress value or values including sign if any.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

If a particle moves along a path such that r : (3 sin t) m and ? : 2t rad, where t is in seconds. what is the particle's acceleration in m/s in 4 seconds? a)- 16.43 b)- 16.29 c)- 15.21 d)- 13.79

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false

Answers: 3

Answer

You know the right answer?

On a piece of paper, sketch the x-y stress state and the properly oriented principal stress state. U...

Questions