Assume that a surface-grinding operation is being carried out under the following conditions: D = 250 mm D=250 mm, d = 0.4 mm d=0.4 mm, v = 0.5 m / s v=0.5 m/s, and V = 50 m / s V=50 m/s. These conditions are then changed to the following: D = 150 mm D=150 mm, d = 0.4 mm d=0.4 mm, v = 0.3 m / s v=0.3 m/s, and V = 25 m / s V=25 m/s. What is the difference in the temperature rise from the initial condition?

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan

Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?

Apiston-cylinder device contains 0.1 m3 of liquid water and 0.9 m3 of water vapor in equilibrium at 800 kpa. heat is transferred at constant pressure until the temperature of water reaches 350 °c. determine (a) the quality of water at the initial state (b) the work associated with this process, (c) the heat associated with this process.