Engineering, 16.04.2020 20:53 Stuckonhomework
A circular specimen of MgO is loaded using a three-point bending mode. Compute the minimum possible radius of the specimen without fracture, given that the applied load is 1000 N (225 lbf), the flexural strength is 105 MPa (15,000 psi), and the separation between load points is 50.0 mm (1.97 in.).
Answers: 2
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
A circular specimen of MgO is loaded using a three-point bending mode. Compute the minimum possible...
Mathematics, 22.02.2021 21:30
SAT, 22.02.2021 21:30
History, 22.02.2021 21:30
Mathematics, 22.02.2021 21:30
Medicine, 22.02.2021 21:30
Mathematics, 22.02.2021 21:30
Mathematics, 22.02.2021 21:30
History, 22.02.2021 21:30
Mathematics, 22.02.2021 21:30
Mathematics, 22.02.2021 21:30