Engineering, 16.04.2020 02:08 Lovergirl13
A beam has a rectangular cross section that is 5 inches wide and 1.5 inches tall. The supports are 60 inches apart and with a 125 lb person standing in the middle of the beam and it deflects .15 in.
Find the modulus of elasticity
Find the beam deflection
Answers: 2
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:10
The flow rate of air through a through a pipe is 0.02 m5/s. a pitot static tube is placed in the flow. the radius of the pitot static tube is 1 mm. assuming the flow to be steady and the air to be at 300k, calculate the difference in total and static pressure if the diameter of the pipe is: (a) d 0.1 m d 0.05 m (c) d 0.01 m
Answers: 2
Engineering, 04.07.2019 19:10
What are the major differences between injection molding and extrusion?
Answers: 2
Engineering, 04.07.2019 19:20
The power source in a certain welding setup generates 3500w that is transferred to the low carbon steel work with a heat transfer factor of 0.85. the melting factor in the operation is 0.45. a continuous fillet weld is to be made with a cross-sectional area of 23 mm2 determine the travel speed at which the welding can be accomplished.
Answers: 3
A beam has a rectangular cross section that is 5 inches wide and 1.5 inches tall. The supports are 6...
English, 14.12.2020 21:00
Social Studies, 14.12.2020 21:00
Social Studies, 14.12.2020 21:00
Chemistry, 14.12.2020 21:00
Mathematics, 14.12.2020 21:00
Mathematics, 14.12.2020 21:00
Mathematics, 14.12.2020 21:00
Mathematics, 14.12.2020 21:00
Mathematics, 14.12.2020 21:00