subject
Engineering, 16.04.2020 01:37 jr928718

A four‐lane freeway (two lanes in each direction) operates at flow rate of 1700 during the peak hour. It has 11‐ft lanes, 4‐ft shoulders, and there are three ramps within three miles upstream of the segment midpoint and four ramps within three miles downstream of the segment midpoint. The freeway has only regular users. There are 8% heavy trucks, and it is on rolling terrain with a peak‐hour factor of 0.85. It is known that 12% of the AADT occurs in the peak hour and that the directional factor is 0.6.

What is the freeway’s AADT?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
question
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
You know the right answer?
A four‐lane freeway (two lanes in each direction) operates at flow rate of 1700 during the peak hour...
Questions
question
Biology, 31.08.2021 17:20
question
Mathematics, 31.08.2021 17:20
question
History, 31.08.2021 17:20
question
Geography, 31.08.2021 17:20
Questions on the website: 13722363