Engineering, 15.04.2020 23:37 brianrodriguez2005

For a continuous fiber composite composed of 50 vol. % fiber, use the provided data to answer the following questions. Fiber: E_f1=220 GPa, E_f2=14 GPa and E_m=4.0 GPa. If a 40,000 N load is applied in the longitudinal direction of the fiber composite for a specimen of uniform cross section, estimate what percentage of the load is carried by the fiber. (Assume the load is within the L-E region of the composite.) If the composite ply were poorly generated resulting in little or no bonding between the matrix and reinforcing fiber, estimate (without calculation) what percentage of the load would is carried by the fiber in the longitudinal direction and briefly explain your reasoning. Calculate the modulus ratio (E_1/E_2) for the composite ply. Data for the components used to produce a uniaxial continuous fiber composite containing V_f=0.53 E-glass fiber embedded in epoxy are shown in the table below.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Ajournal bearing has a journal diameter of 3.250 in with a unilateral tolerance of 20.003 in. the bushing bore has a diameter of 3.256 in and a unilateral tolerance of 0.004 in. the bushing is 2.8 in long and supports a 700-lbf load. the journal speed is 900 rev/min. find the minimum oil film thickness and the maximum film pressure for both sae 20 and sae 20w-30 lubricants, for the tightest assembly if the operating film temperature is 160°f. a computer code is appropriate for solving this problem.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Shafts are machine elements that are used to a) carry axial loads b) direct shear loads c) transmit power d) rotate at constant speed e) none of the above circular and square shafts subjected to the same torque under the same circum behave a) the same way b) almost the same way

Answers: 2

Answer

You know the right answer?

For a continuous fiber composite composed of 50 vol. % fiber, use the provided data to answer the fo...

Questions