Engineering, 15.04.2020 23:34 steph2478

Air enters a compressor at 100 kPa and 25 ⁰C. It is compressed to 2 MPa and exits the compressor at 540 K. The compressor is at a higher temperature than the surroundings, therefore 140 kJ is lost to the surroundings (as heat) per kg of air flowing through the compressor. You can neglect the kinetic and potential energy. (a) What is the reversible work? (answer in kJ/kg, as a negative number) (b) What is the irreversibility rate? (answer in kJ/kg)

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Which of the following controllers anticipates the future from the slope of errors over time? a)-proportional b)-on/off c)-integral d)-derivative.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0

Answers: 3

Answer

Engineering, 04.07.2019 18:20

Water vapor initially at 10 bar and 400 °c is contained within a piston-cylinder assembly. the water lost heat to the surrounding according to isochoric (iso-volumetric) process until its temperature is 150 °c. the water is then condensed isothermally to saturated liquid. for the water as a system, calculate the work in kj/kg

Answers: 2

Answer

You know the right answer?

Air enters a compressor at 100 kPa and 25 ⁰C. It is compressed to 2 MPa and exits the compressor at...

Questions