subject
Engineering, 15.04.2020 17:29 moonk7733

A section of reservoir can be modeled as a rectangular block, with linear flow of oil through it. The face producing oil is 10 ft high by 120 ft wide. The length over which the pressure drop occurs is 1000 ft. The rock has two layers. The lower 8 ft of the 10-ft thickness has permeability 20 mD. The upper 2 ft has permeability 300 mD. Pressure on the producing face is 3200 psi; pressure on the opposite face is 4500 psi. Viscosity of the oil is 0.85 cp and specific gravity is 0.81. B_o is 0.90 rb/stb. What rate is oil produced in units stb/day?

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:20
Inspection for bearing condition will include: (clo4) a)-color b)-smell c)-size d)-none of the above
Answers: 1
question
Engineering, 04.07.2019 19:10
How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?
Answers: 2
question
Engineering, 04.07.2019 19:20
In the winter, in order to keep the classroom steadily at 68 f before 10 pm, heating with an average rate of 42,000 btu/hr is provided. assume the outdoor temperature maintains at 32°f, determine the electrical power (kw) required to (a) operate a reversible heat pump (b) operate a real heat pump with a cop (7) of 4.5 and (c) operate an electrical-resistance heater.
Answers: 3
question
Engineering, 06.07.2019 03:20
Aload of 10kn is to be suddenly applied to the free end of a vertical rod of length 500 mm, the upper end being rigidly fixed. 190 mechanical science what should the diameter of the rod be if the maximum stress in the rod is not to exceed 100 mpa? the tensile modulus of the rod is 205 gpa.
Answers: 2
You know the right answer?
A section of reservoir can be modeled as a rectangular block, with linear flow of oil through it. Th...
Questions
question
History, 24.09.2019 00:20
question
Mathematics, 24.09.2019 00:20
Questions on the website: 13722363