Engineering, 14.04.2020 23:47 Dreynolds1667

Hot carbon dioxide exhaust gas at 1 atm is being cooled by flat plates. The gas at 220 °C flows in parallel over the upper and lower surfaces of a 1.5-m-long flat plate at a velocity of 3 m/s.
If the flat plate surface temperature is maintained at 80 °C, determine (a) the local convection heat transfer coefficient at 1 m from the leading edge, (b) the average convection heat transfer coefficient over the entire plate, and (c) the total heat flux transfer to the plate.

Answers: 2

Show answers

Answers

The local convection heat transfer coefficient at 1 m from the leading edge is $0.44 \frac{W}{m^{2} \times K}$ , the average convection heat transfer coefficient over the entire plate is $0.293 \frac{W}{m^{2} \times K}$ and the total heat flux transfer to the plate is 61.6 KJ .

Explanation:

It is case of heat and mass transfer in which due to temperature difference between gas and surface. Further temperature boundary layer will developed on flat plate in longitudinal direction.

Hot carbon dioxide exhaust gas

physical properties

$r= 1.05 \frac{kg}{m^{3}}$

$c_p = 1.02 \frac{kJ}{Kg \times K}$

$m= 231 \times 10^{7} \frac{N \times s }{m^2}$

υ = $21.8 \times 10^{6} \frac{m^2}{s}$

$k = 32.5 \times 10^{3} \frac{W}{m \times K}$

$\alpha = 30.1 \times 10^{6} \frac{m^{2}}{s}$

Pr = 0.725

Apart from these other data arr given below,

$v= 3 \frac{m}{s} \\ p= 1 atm \\ L_c = 1.5m \\T_g= 220 C \\ T_s = 80 C$

To find the local convection heat transfer coefficient at 1 m from the leading edge, we use correlation used for laminar flow over flat plate,

$Nu = \frac{ h \times L }{k} = 0.332 \times (Re^{\frac{1}{2} }) \times (Pr^{\frac{1}{3} })$

where h= Average heat transfer coefficient

L= Length of a plate

k= Thermal Conductivity of carbon dioxide

Re = Reynold's Number

Pr = Prandtle Number

(a) Convection heat transfer coefficient at 1 m from the leading edge

is referred as local convection heat transfer coefficient.

To find convection heat transfer coefficient at 1 m from leading edge,

$Nu = \frac{ h_local \times L }{k} = 0.332 \times (Re^{\frac{1}{2} }) \times (Pr^{\frac{1}{3} })$

Here, first we have to find Re and Pr,

$Re = \frac{r \times v \times L}{m}$

$Re = \frac{1.0594 \times 3 \times 1}{231 \times 10^{7}}$

$Re = 20.63 \times 10^{-10}$

Pr number is take from physical property data and Pr is 0.725.

Putting value of Re and Pr in main equation,

we get

$Nu = \frac{ h_local \times 1 }{32.5 \times 10^{3}} = 0.332 \times ( (20.63 \times 10^{-10})^{\frac{1}{2} }) \times (0.725^{\frac{1}{3} })$

$h_local = 32.5 \times 10^{3} \times 0.332 \times ( (20.63 \times 10^{-10})^{\frac{1}{2} }) \times (0.725^{\frac{1}{3} })$

$h_local = 0.44 \frac{W}{m^{2} \times K}$

(b) To find average convection heat transfer coefficient,

it can be find out as case (a), only difference is that instead of L=1 m, L=1.5 m would come,

Therefore,

$Nu = \frac{ h \times 1.5 }{32.5 \times 10^{3}} = 0.332 \times ( (20.63 \times 10^{-10})^{\frac{1}{2} }) \times (0.725^{\frac{1}{3} })$

Finally,

$h = \frac{0.44}{1.5}$

$h = 0.293 \frac{W}{m^{2} \times K}$

$Q = h \times (T_g - T_s)$

$Q = 0.293 \times (220-80) \\ Q= 0.293 \times 140 \\ Q= 61.6 KJ$

Answer from: Quest

twist boundary

explanation:

Answer from: Quest

energy can cross the boundaries of a closed system in the form of heat and mass

explanation:

Another question on Engineering

Engineering, 04.07.2019 03:10

What precautions should you take to prevent injuries when dealing with heavy loads?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Water at 70°f and streams enter the mixing chamber at the same mass flow rate, determine the temperature and the quality of the exiting stream. 0 psia is heated in a chamber by mixing it with saturated water vapor at 20 psia. if both streams enters the mixing chamber at the same mass flow rate, determine the temperature and the quality of the existing system.

Answers: 2

Answer

Engineering, 04.07.2019 18:10

At 12 noon, the count in a bacteria culture was 400; at 4: 00 pm the count was 1200 let p(t) denote the bacteria cou population growth law. find: (a) an expression for the bacteria count at any time t (b) the bacteria count at 10 am. (c) the time required for the bacteria count to reach 1800.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Which of the following components of a pid controlled accumulates the error over time and responds to system error after the error has been accumulated? a)- proportional b)- derivative c)- integral d)- on/off.

Answers: 2

Answer

You know the right answer?

Hot carbon dioxide exhaust gas at 1 atm is being cooled by flat plates. The gas at 220 °C flows in p...

Questions