Engineering, 14.04.2020 22:00 corynanderson16
Consider a continuous-time LTI system whose frequency response is I x sin(4w) H(jw) = -x h(t)e-jwtdt = w If the input to this system is a periodic signal x(t) = { ~ l, O:s:t<4 4:St<8 with period T = 8, determine the corresponding system output y(t).
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:20
Ahe-xe mixture containing a 0.75 mole fraction of helium is used for cooling electronics in an avionics application. at a temperature of 300 k and atmospheric pressure, calculate the mass fraction of helium and the mass density, molar concentration and molecular weight of the mixture. if the cooling capacity is 10 l, what is the mass of the coolant?
Answers: 3
Engineering, 04.07.2019 18:20
An engine runs on the ideal diesel cycle. the cycle has a compression ratio of 20 and a cutoff ratio of 2. the highest temperature in the cycle is 1200 k. if the heat into the system is 300 kj/kg of working fluid and using variable specific heats determine the work produced per mass of working fluid
Answers: 3
Engineering, 04.07.2019 18:20
How much power could a wind turbine produce if it had the following specifications? cp = 0.45 -d=1.2kg/m3 d=50m v 5m/s
Answers: 2
You know the right answer?
Consider a continuous-time LTI system whose frequency response is I x sin(4w) H(jw) = -x h(t)e-jwtdt...
Questions
Social Studies, 20.02.2020 08:08
Computers and Technology, 20.02.2020 08:08
Social Studies, 20.02.2020 08:08
Chemistry, 20.02.2020 08:08
Mathematics, 20.02.2020 08:08
