4. Determine the slope and deflection at point A of the simply supported beam. It is given that the modulus of elasticity, E, is 29,000 ksi and the moment of inertia, I, is 400 in4. Solve the problem using moment-area theorems. Also, plot the shear, moment and deformed shape diagrams using RISA (be sure to use correct geometric and material properties). Compare your hand calculations to those obtained using RISA and discuss.

Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10

The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?

Wiy doeres rere okhn a pump whon working betwon the same pressure range?