Engineering, 14.04.2020 19:55 agelafa
The COP of vapor-compression refrigeration cycles improves when the refrigerant is subcooled at the condenser exit.
To maximize this effect, which of the following can be done?
a) The refrigerant can be subcooled lower than the temperature of the sink.
b) The refrigerant can be subcooled until the temperature of the sink.
c) The refrigerant can be subcooled until its freezing point.
d) The refrigerant can be subcooled indefinitely.
Answers: 1
Another question on Engineering
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
Engineering, 04.07.2019 18:10
The thermal expansion or contraction of a given metal is a function of the f a)-density b)-initial temperature c)- temperature difference d)- linear coefficient of thermal expansion e)- final temperature f)- original length
Answers: 2
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
You know the right answer?
The COP of vapor-compression refrigeration cycles improves when the refrigerant is subcooled at the...
Questions
Mathematics, 04.01.2021 02:10
Mathematics, 04.01.2021 02:10
Mathematics, 04.01.2021 02:10
Mathematics, 04.01.2021 02:10
Computers and Technology, 04.01.2021 02:10
Mathematics, 04.01.2021 02:10
