Engineering, 14.04.2020 19:17 shayshay4352

The lid on a pressure vessel is held down with 10 bolts that pass through the lid and a flange on the pressure vessel (similar to example 8-4, in the text). The bolts are secured with nuts under the flange. There are no washers. The thickness of the lid is 28 mm and the thickness of the flange is 28 mm. The vessel and lid are both made of steel. The vessel is pressurized to 8 MP a, and the area of the lid exposed to the pressure is 31.4e3 mm². The modulus of elasticity is 207 GPa. The chosen bolts are ISO property class 9.8 and are coarse-pitch series, M12.
Find the external load, P, on each bolted joint.

Answers: 1

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Most leaks in reciprocating air compressors can be detected and minimized by: (clo4) a)-detecting leakage areas using ultrasonic acoustic detector. b)-tightening joints and connections c)-replacing faulty equipment d)-all of the given options

Answers: 2

Answer

Engineering, 04.07.2019 18:20

Aquick transition of the operating speed of a shaft from its critical speed will whirl amplitude. (a) increase (b) limit (c) not affect (d) zero

Answers: 2

Answer

Engineering, 04.07.2019 19:10

Asteam is contained in a rigid tank with a volume of 1 m3. initially, the pressure and temperature are 7 bar and 500 oc, respectively. the temperature drops due to cooling process. determine: (1) the temperature at which condensation begins in °c, (2) the fraction of the total mass that has condensed when the pressure decreased to 0.5 bar. (3) the volume in m3 occupied by saturated liquid at the final state?

Answers: 3

Answer

Engineering, 04.07.2019 19:20

Air enters a horizontal, constant-diameter heating duct operating at steady state at 290 k, 1 bar, with a volumetric flow rate of 0.25 m°/s, and exits at 325 k, 0.95 bar. the flow area is 0.04 m2. assuming the ideal gas model with k = 1.4 for the air, determine (a) the velocity at the inlet and exit, each in m/s, and (c) the rate of heat transfer, in kw flow rate, in kg/s, (b) the mass kg 0.3

Answers: 2

Answer

You know the right answer?

The lid on a pressure vessel is held down with 10 bolts that pass through the lid and a flange on th...

Questions