Engineering, 14.04.2020 18:25 ashleyuchiha123
An inspector must inspect a production batch of 8,000 parts using a gaging method. If the actual fraction defect rate in the batch is 0.02, and the inspector’s accuracy is given by p1 =0.98 and p2 = 0.78, Determine:
a. the number of defects the inspector can be expected to report.
b. the expected number of Type I and Type II errors the inspector will make.
c. What is the expected fraction defect rate that the inspector will report at the end of the inspection task?
Answers: 2
Another question on Engineering
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
Engineering, 04.07.2019 18:20
Amixture of slurry and mud is to be pumped through a horizontal pipe of diameter 500 mm. the fluid behaves as a bingham plastic with a yield stress of 30 pa and viscosity 0.04 pa.s. describe the effects of the shear stress through a transverse section of the pipe by plotting the variation in shear stress and velocity profile: (i) just before the slurry starts to move (ii) as the slurry flows when the pressure gradient is double that in part (i)
Answers: 3
Engineering, 04.07.2019 19:10
10 kg of co2 is initially contained at 400 kpa and 300 k. the gas constant for carbon dioxide is 189 j/lkg k) and has a specific heat ratio, k, of 1.289. isentropic expansion then occurs until the pressure is 200 kpa. a) determine the initial volume of co2 in m. b) determine the final temperature in k. c) determine the work done by the system during the expansion kl.
Answers: 2
Engineering, 04.07.2019 19:10
Asteel wire of 2 mm diameter is fixed between two points located 2 m apart. the tensile force in the wire is 250n, if its density of steel is given by 7830 kg/m3 the fundamental frequency of vibration hz? ?
Answers: 3
You know the right answer?
An inspector must inspect a production batch of 8,000 parts using a gaging method. If the actual fra...
Questions
Mathematics, 20.11.2020 02:00
Spanish, 20.11.2020 02:00
Biology, 20.11.2020 02:00
Mathematics, 20.11.2020 02:00
Medicine, 20.11.2020 02:00
English, 20.11.2020 02:00
Mathematics, 20.11.2020 02:00
Chemistry, 20.11.2020 02:00
Mathematics, 20.11.2020 02:00
