Engineering, 14.04.2020 16:00 elijahjacksonrp6z2o7

1. As a design engineer for a large heat exchanger manufacturing company, you are to provide a quick estimate on the size of a shell-and-tube heat exchanger. The heat exchanger will be used to condense steam (1 atm) within the shell by raising the temperature liquid water from 20 to 90°C within the tubes. It is desired to transfer 600kW from the steam to the liquid water. The diameter of the tubes is 1 cm and the velocity of the liquid water is not to exceed 3 m/s. Determine: a) the mass flow rate of the liquid water, b) the minimum number of tubes required in this one-shell and two-tube-pass heat exchanger, c) the steam condensation rate, and d) the tube length required to transfer 600kW, if the tubes are thin-walled and minimum number of tubes are considered.

Answers: 3

Show answers

Another question on Engineering

Engineering, 03.07.2019 19:30

When using the ohmmeter function of a digital multimeter, the leads are placed in what position relative to the component being tested? a. parallel b. control c. series d. line

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

The higher the astm grain-size number, the coarser the grain is. a)-true b)-false

Answers: 3

Answer

Engineering, 04.07.2019 18:10

An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature

Answers: 2

Answer

You know the right answer?

1. As a design engineer for a large heat exchanger manufacturing company, you are to provide a quick...

Questions