Water at 40°F is pumped from a lake at elevation 5173 ft to a snow-making machine at a rate of 120 gpm. The snow making machine is at elevation 5512 ft and requires the water to be at a pressure of 180 psi. The steel pipe (ε = 0.00015 ft) is 2000 ft long and 3 inches in diameter.

(a) Make a sketch to define the problem.
(b) Determine the head that the pump must add.

Acommercial grade cubical freezer, 4 m on a side, has a composite wall consisting of an exterior sheet of 5.0-mm thick plain carbon steel (kst= 60.5 w/m k), an intermediate layer of 100-mm thick polyurethane insulation (kins 0.02 w/m k), and an inner sheet of 5.0- mm thick aluminium alloy (kal polyurethane insulation and both metallic sheets are each characterized by a thermal contact resistance of r 2.5 x 104 m2 k/w. (a) what is the steady-state cooling load that must be maintained by the refrigerator under conditions for which the outer and inner surface temperatures are 25°c and -5°c, respectively? (b) for power saving purpose, which wall material should be increased/reduced in. thickness in order to reduce 50% of the cooling load found in part (a)? redesign the thickness of the proposed material. 177 w/m-k). adhesive interfaces between the q=575.93 w