Engineering, 10.04.2020 23:59 isaiahromero15
Design an op amp circuit to average the input of six sensors used to measure temperature in restaurant griddles for a large fast-food chain that wants to be sure that the cooking temperature is adequate to kill all of the pathenogenic E. coli H7:01578 bacteria. See hints.
Hints:
• When the problem says "design," that means that you should select specific values for the various components (i. e., resistors, capacitors, etc.) and show the location of those components in a schematic diagram.
• The high input impedance and low output impedance of transistors and op amps allow us to build circuits by combining various elements, using the output of one as the input of another. For example, you can use an inverting op amp with a gain of 1 after an inverting op amp to reverse the sign of the voltage.
• Op amp circuits typically use resistors rated in kΩ, and current is in the mA range. Standard resistor values are 1.0, 1.1, 1.2, 1.3, 1.5, 1.6, 1.8, 2.0, 2.2, 2.4, 2.7, 3.0, 3.3, 3.6, 3.9, 4.3, 4.7, 5.1, 5.6, 6.2, 6.8, 7.5, 8.2, 9.1, and 10 kΩ. Other values can be obtained by combining resistors.
Answers: 2
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
Engineering, 04.07.2019 18:20
Vibration monitoring this technique uses the noise or vibration created by mechanical equipment and in seme cases by plant systems to detemine their actual condtion. a)- true b)- false
Answers: 2
Design an op amp circuit to average the input of six sensors used to measure temperature in restaura...
Mathematics, 27.07.2021 20:40
Mathematics, 27.07.2021 20:40
Geography, 27.07.2021 20:40
Computers and Technology, 27.07.2021 20:40
Mathematics, 27.07.2021 20:40
Mathematics, 27.07.2021 20:40