subject
Engineering, 07.04.2020 23:38 deeboss177

An object of irregular shape has a characteristic length of � = 1.00 [�] and is maintained at a uniform surface temperature of �. = 400 [�]. When placed in atmospheric air at a temperature of �- = 300 [�] and moving with a velocity of � = 100 [ 3 . ], the average heat flux from the surface to the air is 13,000[ 2 3&]. If a second object of the same shape, but with a characteristic length of � = 5.00 [�], is maintained at a surface temperature of �. = 400 [�] and is placed in atmospheric air at �- = 300 [�], what will the value of the average convection coefficient be if the air velocity is � = 20 [ 3 . ]?

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 06.07.2019 04:20
Explain the similarities and differences in the design guidelines for turning and for
Answers: 1
question
Engineering, 06.07.2019 05:10
An ideal vapour-compression heat pump cycle provides a heating rate of 12btu/s. the working fluid, refrigerant 134a, enters the compressor as a saturated vapor at 40 psi and exits the condenser as a saturated liquid at 160 psi. determine (a) the mass flow rate of the working fluid in lb/min (b) the compressor power in btu/min. (c) the coefficient of performance.
Answers: 2
question
Engineering, 06.07.2019 05:20
Amass of 3 kg of saturated liquid-vapor mixture of water is contained in a piston-cylinder device at 150 kpa. initially, 1 kg of the water is in the liquid phase and the rest is in the vapor phase. heat is now transferred to the water, and the piston, which is resting on a set of stops, starts moving when the pressure inside reaches 500 kpa. heat transfer continues until the total volume increases by 20 percent. determine (a)-the initial and final temperatures, (b)-the mass of liquid water when the piston first starts moving, and (c)-the work done during this process. d)-show the process on a p-v diagram. you don't need to indicate p& v values, but clearly indicate where all states are located in the phase diagram.
Answers: 3
You know the right answer?
An object of irregular shape has a characteristic length of � = 1.00 [�] and is maintained at a unif...
Questions
question
Social Studies, 20.04.2021 18:10
question
Mathematics, 20.04.2021 18:10
question
Health, 20.04.2021 18:10
question
Mathematics, 20.04.2021 18:10
question
English, 20.04.2021 18:10
question
Mathematics, 20.04.2021 18:10
Questions on the website: 13722360