A flag pole 20 m tall with a diameter of 0.12 m has at its top a flag which measures 2 m tall and 2.5 m wide. a) Calculate the aerodynamic force on the combination pole and flag is the wind speed measured at the top of the pole is 20 m/s. b) Discuss factors which may cause your calculation to be higher or lower than the actual force.

Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false

Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1

Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.