Wet solids pass through a continuous dryer. Hot dry air enters the dryer at a rate of
40...
Engineering, 07.04.2020 16:25 jcarver2494
Wet solids pass through a continuous dryer. Hot dry air enters the dryer at a rate of
400 kg/min and picks up the water that evaporates from the solids. Humid air leaves
the dryer at 50°C containing 2.44 wt% water vapor and passes through a condenser in
which it is cooled to 10°C. The pressure is constant at 1 atm throughout the system.
a) Draw a diagram of the process.
b) At what rate (kg/min) is water evaporating in the dryer?
c) Use the psychrometric chart to estimate the wet-bulb temperature, relative
humidity, dew point, and specific enthalpy of the air leaving the dryer.
d) Use the psychrometric chart to estimate the absolute humidity and specific
enthalpy of the air leaving the condenser.
e) Use the results from part (b) and (c) to calculate the rate of condensation of
water (kg/min) and the rate at which heat must be transferred from the
condenser (kW).
f) If the dryer operates adiabatically, what can you conclude about the
temperature of the entering air? Briefly explain your reasoning. What
additional information if any would you need to calculate this temperature?
Answers: 1
Engineering, 03.07.2019 14:10
Amass of 1.5 kg of air at 120 kpa and 24°c is contained in a gas-tight, frictionless piston-cylinder device. the air is now compressed to a final pressure of 720 kpa. during the process, heat is transferred from the air such that the temperature inside the cylinder remains constant. calculate the boundary work input during this process.
Answers: 2
Engineering, 04.07.2019 08:10
Which of the following is an easy way to remember the modified “x” tire rotation? a. nondrive wheels straight, cross the drive wheels b. drive wheels straight, cross the nondrive wheels c. drive wheels crossed, nondrive wheels straight d. drive wheels crossed, nondrive wheels crossed
Answers: 1
Engineering, 04.07.2019 18:10
An air compression refrigeration system is to have an air pressure of 100 psia in the brine tank and an allowable air temperature increase of 60°f for standard vapor compression cycle temperatures of 77 f entering the expansion cylinder and 14 f entering the compression cylinder, calculate the coefficient of performance a. 2.5 b 3.3 c. 4.0 d. 5.0
Answers: 3
Engineering, 04.07.2019 18:20
Inadequate stores control is not an obstacle to effective work order system. (clo4) a)-true b)-false
Answers: 3
Biology, 03.12.2019 14:31
Mathematics, 03.12.2019 14:31
English, 03.12.2019 14:31
Mathematics, 03.12.2019 14:31
Mathematics, 03.12.2019 14:31
Spanish, 03.12.2019 14:31
Mathematics, 03.12.2019 14:31