subject
Engineering, 07.04.2020 15:28 zanaplen27

Eagletrons are all-electric automobiles produced by Mogul Motors, Inc. One of the concerns of Mogul Motors is that the Eagletrons be capable of achieving appropriate maximum speeds. To monitor this, Mogul executives take samples of ten Eagletrons at a time. For each sample, they determine the average maximum speed and the range of the maximum speeds within the sample. They repeat this with 35 samples to obtain 35 sample means and 35 ranges. They find that the average sample mean is 103.50 miles per hour, and the average range is 4.00 miles per hour. Using these results, the executives decide to establish an R-chart. They would like this chart to be established so that when it shows that the range of a sample is not within the control limits, there is only approximately a 0.0027 probability that this is due to natural variation. The control limits for the chart based on the above requirement for the given information are: UCL Subscript Upper R overbar = nothing miles per hour (round the reponse to three decimal places). amison Kovach Supply Company manufactures paper clips and other office products. Although inexpensive, paper clips have provided the firm with a high margin of profitability. Sample size is 200 . Results are given for the last 10 samples. Sample 1 2 3 4 5 6 7 8 9 10 Defectives 4 8 3 5 6 5 4 5 2 11 The type of control chart that is best to monitor this process is â–¼ c minus chart x overbar minus chart p minus chart. Eagletrons are all-electric automobiles produced by Mogul Motors, Inc. One of the concerns of Mogul Motors is that the Eagletrons be capable of achieving appropriate maximum speeds. To monitor this, Mogul executives take samples of ten Eagletrons at a time. For each sample, they determine the average maximum speed and the range of the maximum speeds within the sample. They repeat this with 35 samples to obtain 35 sample means and 35 ranges. They find that the average sample mean is 103.50 miles per hour, and the average range is 4.00 miles per hour. Using these results, the executives decide to establish an R-chart. They would like this chart to be established so that when it shows that the range of a sample is not within the control limits, there is only approximately a 0.0027 probability that this is due to natural variation. The control limits for the chart based on the above requirement for the given information are: UCL Subscript Upper R overbar = nothing miles per hour (round the reponse to three decimal places). amison Kovach Supply Company manufactures paper clips and other office products. Although inexpensive, paper clips have provided the firm with a high margin of profitability. Sample size is 200 . Results are given for the last 10 samples. Sample 1 2 3 4 5 6 7 8 9 10 Defectives 4 8 3 5 6 5 4 5 2 11 The type of control chart that is best to monitor this process is â–¼ c minus chart x overbar minus chart p minus chart.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Consider a large isothermal enclosure that is maintained at a uniform temperature of 2000 k. calculate the emissive power of the radiation that emerges from a small aperture on the enclosure surface. what is the wavelength ? , below which 10% of the emission is concentrated? what is the wavelength ? 2 above which 10% of the emission is concentrated? determine the wavelength at which maximum spectral emissive power occurs. what is the irradiation incident on a small object placed inside the enclosure?
Answers: 2
question
Engineering, 04.07.2019 18:10
Water at 55c flows across a flat plate whose surface temperature is held constant at 95c. if the temperature gradient at the plate's surface for a given value of x is 18 c/mm, find a) local heat transfer coefficient. b) heat flux
Answers: 3
question
Engineering, 04.07.2019 18:20
A2-m rigid tank initially contains saturated water vapor at 100 kpa. the tank is connected to a supply line through a valve. steam is flowing in the supply line at 600 kpa and 300 c. the valve is opened, and steam is allowed to enter the tank until the pressure in the tank reaches the line pressure, at which point the valve is closed. a thermometer placed in the tank indicates that the temperature at the final state is 200°c. determine (a) the mass of steam that has entered the tank (b) the amount of heat transfer.
Answers: 3
You know the right answer?
Eagletrons are all-electric automobiles produced by Mogul Motors, Inc. One of the concerns of Mogul...
Questions
question
Mathematics, 07.04.2020 04:43
question
Mathematics, 07.04.2020 04:43
Questions on the website: 13722363