Identify the following statements as True or False?

1. Copper has a higher thermal conductivity than aluminum.
2. The density of copper is closer to that of aluminum than it is to iron.
3. Bronze alloys with more than 20 wt% tin are quite ductile and easily cold-worked compared to alloys with 5 wt% tin or less, because large additions of the soft metal tin enhance the ductility of copper.
4. Copper and its alloys form a green tarnish over time, consisting of sulfides and carbonates.
5. The electrical conductivity of somewhat impure copper alloys can actually be increased by introducing a small amount of oxygen into the copper, provided the oxygen reacts with impurities and coalesces them into larger oxide particles.
6. Copper is relatively resistant to corrosion by neutral and even mildly basic water.

Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.

Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?

A3-mm-thick panel of aluminum alloy (k 177 w/m-k, c 875 j/kg-k and ? = 2770 kg/m) is finished on both sides with an epoxy coating that must be cured at or above t,-150°c for at least 5 min. the production line for the curing operation involves two steps: (1) heating in a large oven with air at ts,0-175°c and a convection coefficient of h, 40 w/m2. k, and (2) cooling in a large chamber with air at 25°c and a con- vection coefficient of he 10 w/m2.k. the heating portion of the process is conducted over a time interval te which exceeds the ime required to reach 150°c by 5 min (h = r + 300 s). the coating has an emissivity of ? = 0.8, and the temperatures of the oven and chamber walls are 175 and 25°c, respectively. if the panel is placed in the oven at an initial temperature of 25°c and removed from the chamber at a safe-to-touch tempera ture of 37°c, what is the total elapsed time for the two-step curing operation?