Ear shaft.3. Chapter 12 –Loading on Spur Gears: A 26-tooth pinion rotating at a uniform 1800 rpm meshes with a 55-tooth gear in a spur gear reducer. Both pinion and gear are manufactured to a quality level of 10. The transmitted tangential load is 22 kN. Conditions are such that Km = 1.7. The teeth are standard 20-degree, full-depth. The module is 5 and the face width 62 mm. Determine the bending stress when the mesh is at the highest point of single tooth contact.

The bending stress is 502.22 MPa

Explanation:

The diameter of the pinion is equal to:

Where

m = module = 5

Np = number of teeth of pinion = 26

= 0.13 m

The pitch line velocity is equal to:

Where

wp = speed of the pinion = 1800 rpm

The factor B is equal to:

The factor A is equal to:

A = 50 + 56*(1 - B) = 50 + 56*(1-0.396) = 83.82

The dynamic factor is:

The geometry bending factor at 20°, the application factor Ka, load distribution factor Km, the size factor Ks, the rim thickness factor Kb and Ki the idler factor can be obtained from tables

JR = 0.41

Ka = 1

Kb = 1

Ks = 1

Ki = 1.42

Km = 1.7

The diametrical pitch is equal to:

The bending stress is equal to:

answer:

constructing a building's framework requires a solid foundation

explanation: