subject
Engineering, 06.04.2020 18:09 markmoroney22

Consider a venturi with a throat to inlet area ratio of 0.8, mounted on the side of an airplane fuselage. The airplane is in flight at standard sea level. If the static pressure at the throat is 2100 lb/ft^2. Calculate the velocity of the airplane. (Standard sea level density, pressure and viscosity are 1.23 kg/m^3 (0.002377 slug/ft^3 ), 1.01 x 10^5 N/m^2 (2116 lb/ft^2 ) and 1.73 x 10^-5 N-s/m^2 (3.737 x 10^-7 lb-s/ft^2 respectively.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 14:10
When at a point two solid phase changes to one solid phase on cooling then it is known as a) eutectoid point b) eutectic point c) peritectic point d) peritectoid point
Answers: 3
question
Engineering, 04.07.2019 18:10
Ariver flows from north to south at 8 km/h. a boat is to cross this river from west to east at a speed of 20 km/h (speed of the boat with respect to the earth/ground). at what angle (in degrees) must the boat be pointed upstream such that it will proceed directly across the river (hint: find the speed of the boat with respect to water/river)? a 288 b. 21.8 c. 326 d. 30.2
Answers: 3
question
Engineering, 04.07.2019 18:10
Assuming compressible flow of air and that the measurements are done at flagstaff a pitot static tube that gives the difference of total and static pressure measures 0.35 m of mercury. what is the velocity of air? assume the temperature to be 300k. (submit your excel or matlab calculation sheet)
Answers: 1
question
Engineering, 04.07.2019 18:10
Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables
Answers: 1
You know the right answer?
Consider a venturi with a throat to inlet area ratio of 0.8, mounted on the side of an airplane fuse...
Questions
question
Arts, 15.12.2020 20:40
Questions on the website: 13722367