Engineering, 04.04.2020 10:30 20emmanuelg1030
A supply fan is operating at 30000 cfm and 4 inch of water with an efficiency of 50%. (a) Calculate the fan power at the current operating condition. (b) Calculate the pressure and power if the supply fan reduces its speed to deliver 20000 cfm.
Answers: 1
cfm
inch
Hp
HpAnother question on Engineering
Engineering, 03.07.2019 15:10
Heat is added to a piston-cylinder device filled with 2 kg of air to raise its temperature 400 c from an initial temperature of t1 27 cand pressure of pi 1 mpa. the process is isobaric process. find a)-the final pressure p2 b)-the heat transfer to the air.
Answers: 1
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
Engineering, 04.07.2019 18:10
An air conditioning system consist of a 5 cm diameter pipe, operating at a pressure of 200 kpa. the air initially enters the pipe at 15°c with a velocity of 20 m/s and relative humidity of 80%. if the heat supply throughout the process is 960 w, determine the relative humidity and the temperature at the outlet
Answers: 3
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
You know the right answer?
A supply fan is operating at 30000 cfm and 4 inch of water with an efficiency of 50%. (a) Calculate...
Questions
Mathematics, 24.07.2019 14:00
Mathematics, 24.07.2019 14:00
Mathematics, 24.07.2019 14:00
Physics, 24.07.2019 14:00
English, 24.07.2019 14:00
Mathematics, 24.07.2019 14:00
Mathematics, 24.07.2019 14:00
Social Studies, 24.07.2019 14:00
