Engineering, 04.04.2020 07:41 Melymarrupe1345

SOX and NOX in the flue gas are proposed to be treated using an electron beam treatment scheme in an irradiation vessel. Two different designs of the irradiation vessel – one without baffles and one with baffles – are being evaluated. A pulse tracer injection test is conducted on each vessel to obtain the residence time distribution in the vessel. Use an appropriate one-parameter model to describe the RTDs. Based on the intrinsic kinetics and RTD data, what improvement (if any) might be expected by adding baffles to the vessel?

Answers: 1

Show answers

Another question on Engineering

Engineering, 03.07.2019 15:10

Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?

Answers: 3

Answer

Engineering, 03.07.2019 15:10

Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.

Answers: 1

Answer

Engineering, 04.07.2019 16:10

The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

You know the right answer?

SOX and NOX in the flue gas are proposed to be treated using an electron beam treatment scheme in an...

Questions