Engineering, 01.04.2020 19:20 rebeccamckellpidge
Flank wear data were collected in a series of turning tests using a coated carbide tool on hardened alloy steel at a feed of 0.30 mm/rev and a depth of 4.0 mm. At a speed of 125 m/min, the tool life is 20.4 min. At a speed of 165 m/min, the tool life is 10 min. Calculate the values of n and C in the Taylor equation for tool life.
Answers: 3
Another question on Engineering
Engineering, 04.07.2019 18:10
Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.
Answers: 3
Engineering, 04.07.2019 18:20
The characteristic roots of a dynamic system are: 1.7920 1.8160 i, -1.7920 1.8160 i, -0.4160 what is the order of this system? what are the settling time and damping ratio of the system?
Answers: 3
Engineering, 04.07.2019 19:20
Amass-spring-viscous damper system of mass 3 kg has a frequency of 100 rad/s and is critically damped. its initial conditions are x(0)-3 mm and (0)-2.3 m/s. does the system overshoot its equilibrium position? prove your answer
Answers: 1
Engineering, 06.07.2019 04:10
Amixture of gases consists of 0.4 kg of oxygen, 0.7 kg of carbon dioxide, and 0.2 kg of helium this mixture is maintained at 100 kpa and 27°c. determine: (a) the apparent molecular weight of this mixture the volume it occupies (b) the partial volume of the oxygen, and (c) (d) the partial pressure of the helium
Answers: 1
You know the right answer?
Flank wear data were collected in a series of turning tests using a coated carbide tool on hardened...
Questions
Mathematics, 18.07.2020 04:01
Mathematics, 18.07.2020 04:01
