Engineering, 01.04.2020 16:58 tahmidtaj150
In a Rankine cycle, superheated steam that enters the turbine at 1273.15 K and 1.8 MPa is then expanded to a vapor at 0.1 MPa. What is the shaft work generated per kilogram of steam if the efficiency of the turbine is 0.56
Answers: 2
Engineering, 04.07.2019 18:10
The drive force for diffusion is 7 fick's first law can be used to solve the non-steady state diffusion. a)-true b)-false
Answers: 1
Engineering, 04.07.2019 18:10
Burgers vector is generally parallel to the dislocation line. a)-true b)-false
Answers: 2
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Derive the correction factor formula for conical nozzle i=-(1+ cosa) and calculate the nozzle angle correction factor for a nozzle whose divergence hal-fangle is 13 (hint: assume that all the mass flow originates at the apex of the cone.
Answers: 3
In a Rankine cycle, superheated steam that enters the turbine at 1273.15 K and 1.8 MPa is then expan...
Chemistry, 22.01.2021 03:50
Mathematics, 22.01.2021 03:50
Business, 22.01.2021 03:50
Chemistry, 22.01.2021 03:50
Medicine, 22.01.2021 03:50
Biology, 22.01.2021 03:50
English, 22.01.2021 03:50
Mathematics, 22.01.2021 03:50
Social Studies, 22.01.2021 03:50
Mathematics, 22.01.2021 03:50
English, 22.01.2021 03:50