Engineering, 31.03.2020 17:52 naenae1405

In one-hundred words or less using Richard Daft and Robert Lengel’s Media Richness Theory, explain a situation where the inappropriate medium was used by you and what would have been a better medium selection and why. Three forms of media must appear in the answer. In your answer, the motive and goal for initiating communication as well as the the outcome must be present in your explanation. Face-to-Face cannot be the better medium selected to improve the situation. Using Ekman and Friesen’s nonverbal categories and Walther's Social Information Processing Theory, explain how nonverbal communication hurt and/or helped the situation.

Required:
Identify specific nonverbal behaviors and the category the behavior belongs.

Answers: 3

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:20

Find the minimum film thickness for a journal bearing with the data below. shaft diameter, d-50 mm, clearance ratio, cdratio? 0.001, shaft speed, n 2000 rpm; bearing length. i 200 mm; eccentricity ration, ? -0.55. ( note, cdratio-ca/d) the minimum film thickness is um

Answers: 2

Answer

Engineering, 06.07.2019 04:20

In modern manufacturing, which types of metal chips would be undesirable and why ? ?

Answers: 3

Answer

Engineering, 06.07.2019 04:30

At flow nozzle is to be installedin a 5-in type k copper tube carrying linseed oil at 77 f. a mercury manometer is to be used to measure the pressure difference across the nozzle when the expected range of the flow rate is from 700 galmin to 1000 gal/min. the manometer scale ranges from 0 to 8.0 in of mercury determine an appropriate diameter of the nozzle.

Answers: 2

Answer

Engineering, 06.07.2019 05:10

The crank case of an automobile is 80 cm long 30 cm wide and 10 cm deep. find out the rate of heat flow from the crank case to the atmosphere when the automobile is moving at 90 km/hr. assume that the vibration of the engine and the chassis iaduce the transition from laminar to turbulent boundary layer may be considered over the entire surface. also find out the drag force on the total surface of the crank case. take the same average convective heat transfer coefficient and average shear stress for front and rare surfaces as for the bottom rnd sides crank case surface temperature is 75°c and atmospheric air temperature is 5 c

Answers: 2

Answer

You know the right answer?

In one-hundred words or less using Richard Daft and Robert Lengel’s Media Richness Theory, explain a...

Questions