Engineering, 31.03.2020 15:15 kakalli9999

Consider a sequential circuit that implements the following function in a self-driving car. Every second, the car's position within the lane is determined with cameras and fed as input to the sequential circuit. Accordingly, the car's steering wheel is moved to one of 2 positions: Left, Right. The car's position can be "Middle of a lane", "Drifting to the right edge of the lane", and "Drifting to the left edge of the lane". If the car is in the "Middle", the steering position is left unchanged. If the car is drifting to one of the edges of the lane, the steering is moved away from the edge, i. e., steering should be moved right if the car is near the left edge of the lane.
a. What are the states for the circuit controlling the steering?
b. What are the inputs to the circuit and what values can those inputs have?
c. Draw the finite state table and finite state diagram for this circuit.

Answers: 2

Show answers

Another question on Engineering

Engineering, 03.07.2019 23:20

Two technicians are discussing the intake air temperature (iat) sensor. technician a says that the computer uses the iat sensor as a backup to the engine coolant temperature (ect) sensor. technician b says that the powertrain control module (pcm) will subtract the calculated amount of fuel if the air measures hot. who is correct

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?

Answers: 1

Answer

Engineering, 04.07.2019 18:10

Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines

Answers: 1

Answer

You know the right answer?

Consider a sequential circuit that implements the following function in a self-driving car. Every se...

Questions