subject
Engineering, 31.03.2020 05:03 hmjjones

In the 1960s through 1980s, a medical filter manufacturer in Ann Arbor discharged 1,4-dioxane (an industrial solvent) directly into the environment, where it ultimately leached into underlying groundwater aquifers. A plume of 1,4-dioxane has been spreading under Ann Arbor and could pose water quality risks if it reaches Barton Pond, which supplies 85% of the city's drinking water. a) Barton Pond contains 1.5 billion gallons (5.68 million m3) of water and initially contains no 1,4-dioxane. Assume the pond is perfectly mixed with one stream flowing in and out at a rate of 1 m3/s. Suppose the plume enters the pond at a rate of 0.1 m3/s and contains 50 mg/L of 1,4-dioxane, which has a first-order decay constant of 6.4*105 s1. What is the steady-state concentration of 1,4-dioxane in the pond? b) Local water authorities find a way to divert the plume such that 1,4-dioxane is no longer entering the pond. How long will it take for the 14-dioxane concentration in the pond to reach the Michigan Department of Environmental Quality's new allowable drinking water level of 7.2 ug/L? c) The EPA classifies 1,4-dioxane as a probable carcinogen with a potency factor of 0.011 (mg/kg/d)1. If the water contains the EPA's allowable limit of 7.2 μg/L of 1,4-dioxane, calculate the carcinogenic risk based on the default EPA exposure factors over a lifetime for ingestion of potable water in an average adult. Is the water safe to drink based on the "rule of thumb" discussed in class?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
The temperature of air decreases as it is compressed by an adiabatic compressor. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
Asolid cylinder is concentric with a straight pipe. the cylinder is 0.5 m long and has an outside diameter of 8 cm. the pipe has an inside diameter of 8.5 cm. the annulus between the cylinder ad the pipe contains stationary oil. the oil has a specific gravity of 0.92 and a kinematic viscosity of 5.57 x 10-4 m2/s. most nearly, what is the force needed to move the cylinder along the pipe at a constant velocity of 1 m/s?
Answers: 3
question
Engineering, 04.07.2019 18:20
Refrigerant-134a enters the compressor of a refrigerator as superheated vapor at 0.14 mpa and -10°c at a rate of 0.05 ka/s and leaves at 0.8 mpa and 50°c. the refrigerant is cooied in the condenser to 0.72 mpa and 26'c. it is then throttled to 0.15 mpa. sketch the t-s diagram for the system and evaluate: 6) the rate of heat removai from the refrigerated space (kw), it) the power input to the compressor (kw), ii) the isentropic efficiency of the compressor (%), and iv) the cop of the refrigerator.
Answers: 2
You know the right answer?
In the 1960s through 1980s, a medical filter manufacturer in Ann Arbor discharged 1,4-dioxane (an in...
Questions
question
Mathematics, 25.02.2021 06:30
question
Mathematics, 25.02.2021 06:30
question
Mathematics, 25.02.2021 06:30
question
Mathematics, 25.02.2021 06:30
question
Mathematics, 25.02.2021 06:30
Questions on the website: 13722361