Write an expression for the output voltage of an AC source that has an amplitude of 19 V and a frequency of 240 Hz. (Use the following as necessary: t. Assume V is in volts and t is in seconds. Do not include units in your answer. Assume V

The y form of iron is known as: a) ferrite b) cementite c) perlite d) austenite

Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.

Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan