Engineering, 30.03.2020 16:19 anaroles04
A disk with diameter = 40 cm and thickness = 5 cm is cast of pure aluminum in an open mold casting operation. Aluminum melts at 660°C, but the pouring temperature will be 800°C. The heat of fusion of aluminum = 398 J/g. Other properties can be found in Tables 4.1 and 4.2. Assume the specific heat has the same value for solid and molten aluminum.
Compute
(a) the unit energy for melting and pouring and
(b) the total energy to heat the metal to the pouring temperature starting from a room temperature of 25°C.
Answers: 2
Engineering, 04.07.2019 18:10
Fluids at rest possess no flow energy. a)- true b)- false
Answers: 3
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
A disk with diameter = 40 cm and thickness = 5 cm is cast of pure aluminum in an open mold casting o...
Social Studies, 28.07.2019 20:00
Mathematics, 28.07.2019 20:00
Physics, 28.07.2019 20:00
Mathematics, 28.07.2019 20:00
Computers and Technology, 28.07.2019 20:00
Mathematics, 28.07.2019 20:00