subject
Engineering, 28.03.2020 03:41 jbot9050

A 32-mm thick AISI 1020 steel plate is sandwiched between two 2024-T3 aluminum plates, one 12-mm thick and the other 20-mm thick, and compressed with a bolt and nut with no washers. The bolt is M10 x 1.5, property class 5.8. a) Determine a suitable length for the bolt, rouded up to the nearest 5 mm b) Estimate the bolt stiffness c) Estimate the stiffness of the members d) Calculate the joint constant C.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Apiston-cylinder with a volume of 0.25 m3 holds 1 kg of air (r 0.287 k/kgk) at a temperature of 100 c. heat transfer to the cylinder causes an isothermal expansion of the piston until the volume triples. how much heat is added to the piston-cylinder?
Answers: 3
question
Engineering, 04.07.2019 18:20
Atank with constant volume contains 2.27 kg of a mixture of water phases (liquid-vapor). in the initial state the temperature and the quality are 127 °c and 0.6, respectively. the mixture is heated until the temperature of 160 oc is reached. illustrate the process in a t-v diagram. then, determine (1) the mass of the vapor in kg at the initial state, (2) the final pressure in kpa.
Answers: 3
question
Engineering, 04.07.2019 19:10
Apressure vessel with an r/t 20 cannot be treated as thin walled vessel. a)-trune b)- false
Answers: 3
question
Engineering, 06.07.2019 03:20
Acountershaft is supported by two tapered roller bearings using indirect mounting. the radial bearing loads are 1120 lb for the left-hand bearing and 2190 lb for the right-hand bearing. the shaft rotates at 400 rpm and is to have an l10 life of 40,000 hours and an application factor of 1.4. assume ka2k 15, and find the required radial rating of each bearing
Answers: 3
You know the right answer?
A 32-mm thick AISI 1020 steel plate is sandwiched between two 2024-T3 aluminum plates, one 12-mm thi...
Questions
question
Mathematics, 31.10.2019 22:31
Questions on the website: 13722363