subject
Engineering, 27.03.2020 04:27 babyphoraaaaa

A water treatment plant has three flocculation compartments that water flows though sequentially (in series). The water is gently mixed in each compartment with rotating paddles, and the power input decreases as water moves through each compartment: Compartment #1: 186 W; Compartment #2: 30.0 W; Compartment #3: 7.50 W. Each compartment is 4.17 m deep, 3.75 m wide, and 4.17 m long. The water temperature is 15 °C the flow rate is 16,000 m3/day. Calculate the velocity gradient for each compartment.

ansver
Answers: 1

Another question on Engineering

question
Engineering, 03.07.2019 15:10
Ahouse has the following electrical appliance usage (1) single 40w lamp used for 4 hours per day (2) single 60w fan used for 12 hours per day (3) single 200w refrigerator that runs 24 hours per day with compressor run 12 hours and off 12 hours find the solar power inverter size in watt with correction factor of 1.25.
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
Water at the rate of 1 kg/s is forced through a tube with a 2.5 cm inner diameter. the inlet water temperature is 15°c, and the outlet water temperature is 50°c. the tube wall temperature is 14°c higher than the local water temperature all along the length of the tube. what is the length of the tube?
Answers: 3
question
Engineering, 04.07.2019 18:20
Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?
Answers: 2
You know the right answer?
A water treatment plant has three flocculation compartments that water flows though sequentially (in...
Questions
question
Chemistry, 17.02.2020 20:16
Questions on the website: 13722363