subject
Engineering, 26.03.2020 23:55 frisha

A concrete mix design calls for 6.5 sacks of cement, a water/cement ratio of 0.45, and an air content of 2.5%. 1. Complete the mix design usage chart below by filling in the shaded cells. Material Type Description Design Quantity Specific Gravity Volume (ft3 ) Cement Type II lb 3.15 Coarse Aggregate ¾" x #4 1,190 lb 2.75 Coarse Aggregate ⅜" x #8 lb 2.72 Fine Aggregate Concrete Sand 1,453 lb 2.66 Water Mixing Water gal 1.00 Air % by Volume 2.5% - Yield lb - 27.00 2. What is the unit weight of this mix in pcf?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 16:10
The force on a cutting tool are 2600n vertically downward and 2100 horizontal. determine the resultant force acting on the tool and the angle at which it acts.
Answers: 1
question
Engineering, 04.07.2019 18:10
Give heat transfer applications for the following, (i) gas turbines (propulsion) ) gas turbines (power generation). (iii) steam turbines. (iv) combined heat and power (chp). (v) automotive engines
Answers: 1
question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
A concrete mix design calls for 6.5 sacks of cement, a water/cement ratio of 0.45, and an air conten...
Questions
question
Business, 25.09.2019 15:30
Questions on the website: 13722360