Engineering, 26.03.2020 22:56 Monicaamm12983

A long rod of 60-mm diameter and thermophysical properties rho = 8000 kg/m3 , c = 500 J/kg·K, and k = 50 W/m·K is initially at a uniform temperature and is heated in a forced convection furnace maintained at 750 K. The convection coefficient is estimated to be 1000 W/m2 ·K. (a) What is the centerline temperature of the rod when the surface temperature is 550 K? (b) In a heat-treating process, the centerline temperature of the rod must be increased from Ti = 300 K to T = 500 K. Compute and plot the centerline temperature histories for h = 100, 500, and 1000 W/m2 ·K. In each case the calculation may be terminated when T = 500 K.

Answers: 2

Show answers

Another question on Engineering

Engineering, 04.07.2019 18:10

Abrake has a normal braking torque of 2.8 kip in and heat-dissipating cast-iron surfaces whose mass is 40 lbm. suppose a load is brought to rest in 8.0 s from an initial angular speed of 1600 rev/min using the normal braking torque; estimate the temperature rise of the heat dissipating surfaces.

Answers: 3

Answer

Engineering, 04.07.2019 18:10

Items are similar to the free issue items, but their access is limited. (clo5) a)-bin stock items free issue b)-bin stock controlled issue c)-critical or insurance spares d)-rebuildable spares e)-consumables

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Describe one experiment in which the glass transition temperature and melting temperature of a totally amorphous thermoplastic material can be determined. show the relevant experimental results in a diagram which should be properly annotated with the two temperatures clearly marked. what is likely to happen to the curve in the diagram if the amorphous polymer is replaced by a thermosetting type?

Answers: 2

Answer

Engineering, 04.07.2019 19:10

How to increase the thermal officiency of an ideal simple rankino cycle? among these methods, which one is the best and why?

Answers: 2

Answer

You know the right answer?

A long rod of 60-mm diameter and thermophysical properties rho = 8000 kg/m3 , c = 500 J/kg·K, and k...

Questions