Engineering, 26.03.2020 19:34 Bryoh
A balanced three phase load is supplied over a three-phase , 60 hz, transmission line with each line have a series impedance of (12.84 j72.76) ohms, the load voltage is 132 kV and the load power is 55 MVA at 0.8 lagging power factor. Determine: a. The ABCD parameters assuming a short line
Answers: 3
Engineering, 04.07.2019 18:10
Steel is coated with a thin layer of ceramic to protect against corrosion. what do you expect to happen to the coating when the temperature of the steel is increased significantly? explain.
Answers: 1
Engineering, 04.07.2019 18:10
Which one from below is not one of the reasons of planning failures? (clo3) a)-planner is careless. b-planner spend less time in the field but more time on the desk c)-planner is not qualified d)-planner does not have sufficient time to properly plan
Answers: 3
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
Engineering, 04.07.2019 18:20
Athin walled concentric tube exchanger is used to cool engine oil from 160°c to 60°c with water that is available at 25°c acting as a coolant. the oil and water flow rates are each at 2 kg/s, and the diameter of the inner tube is 0.5 m and the corresponding value of the overall heat transfer coefficient is 250 w/m2. oc. how long must the heat exchanger be to accomplish the desired cooling? cpwater=4.187 kj/kg-candcpengine el=2.035 kj/kg·°c, oil . 120]
Answers: 1
A balanced three phase load is supplied over a three-phase , 60 hz, transmission line with each line...
Social Studies, 19.03.2020 05:39
Chemistry, 19.03.2020 05:39
Mathematics, 19.03.2020 05:39
Mathematics, 19.03.2020 05:40
Computers and Technology, 19.03.2020 05:40
History, 19.03.2020 05:40