Engineering, 25.03.2020 00:34 jokerr5584
A simple Rankine cycle uses water as the working fluid. The boiler operates at 6000 kPa and the condenser at 50 kPa. At the entrance of the turbine the temperature is 450 deg C. The isentropic efficiency of the turbine is 94 percent, pressure and pump losses are negligible, and the water inthe condenser is subcooled by 6.3 degC. The boiler is sized for a mass flow rate of 20 kg/s. Determine the rate at which heat is added in the boiler, the power required to operate the pumps, the net power produced by the cycle, and the thermal efficiency. (ANSWER: 59.66 MW, 122kW, 18.05 MW, and 30.3 percent)
Answers: 1
Engineering, 04.07.2019 18:10
Acompressor receives the shaft work to decrease the pressure of the fluid. a)- true b)- false
Answers: 3
Engineering, 06.07.2019 03:30
The load on a bolt consists of an axial pull of 10 kn together with a transverse shear force of 5 kn. the bolt material has a yield strength of syt syc 100 mpa. find the diameter of the bolt at factor of safety n-0.5, n 1 and n-2 using maximum shear stress theory
Answers: 3
Engineering, 06.07.2019 04:20
Consider a beam traveling through diamond and impinging upon the diamond-air interface. the critical angle of incidence for total internal reflection to occur is closest to the following value: select one: a)-22.50° b)-23.85 c)-24.30 d)-23.40° e)-none of the above
Answers: 3
Engineering, 06.07.2019 04:20
Derive the 2-d finite difference equation for a uniform grid for a node: a) at a plane surface with a uniform heat flux b) at an internal corner with convection
Answers: 1
A simple Rankine cycle uses water as the working fluid. The boiler operates at 6000 kPa and the cond...
Mathematics, 28.07.2019 21:30
Biology, 28.07.2019 21:30
Biology, 28.07.2019 21:30
Biology, 28.07.2019 21:30
English, 28.07.2019 21:30
Biology, 28.07.2019 21:30
Chemistry, 28.07.2019 21:30
Mathematics, 28.07.2019 21:30
Biology, 28.07.2019 21:30