subject
Engineering, 24.03.2020 00:02 michaelmonroe9105

Pine Valley Furniture wants to use Internet systems to provide value to its customers and staff. There are many software technologies available to internet systems development teams, including SOAP, HTML, JSON, XML, CSS, ASP. NET, Objective C, php, JAVAâ„¢, Python, Ruby, AJAX, Swiftâ„¢, AngularJS, Bootstrap, jQuery, R, and many more.

Choose an option below to complete this assignment:Write a 4-page paper that compares and contrasts at least three Internet systems development software technologies. Explain why an Internet systems developer might choose one technology over another technology. Explain how these technologies can bring value to the business or organization. Incorporate additional research or academic information to support your paper.

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Thermal stresses are developed in a metal when its a) initial temperature is changed b) final temperature is changed c) density is changed d) thermal deformation is prevented e) expansion is prevented f) contraction is prevented
Answers: 2
question
Engineering, 04.07.2019 18:10
Water in a partially filled large tank is to be supplied to the roof top, which is 8 m above the water level in the tank, through a 2.2-cm-internal-diameter pipe by maintaining a constant air pressure of 300 kpa (gage) in the tank. if the head loss in the piping is 2 m of water, determine the discharge rate of the supply of water to the roof top in liters per second.
Answers: 3
question
Engineering, 04.07.2019 18:10
An ideal otto cycle with air as the working fluid has a compression ratio of 8. the minimum and maximum temperatures in the cycle are 300 k and 1340 k. use constant specific heats at room temperature to determine (a) the amount of heat transferred to the air during the heat- addition kj/kg, (b) the thermal efficiency, and (c) the thermal efficiency of a carnot cycle ope limits. process, in rating between the same temperature
Answers: 2
question
Engineering, 04.07.2019 18:10
Aturning operation is performed with following conditions: rake angle of 12°, a feed of 0.35 mm/rev, and a depth of cut of 1.1 mm. the work piece is aluminum alloy 6061 with t6 heat treatment (a16061-t6). the resultant chip thickness was measured to be 1.0 mm. estimate the cutting force, fc. use shear stress of 207 mpa and coefficient of friction on the tool face of 0.6.
Answers: 1
You know the right answer?
Pine Valley Furniture wants to use Internet systems to provide value to its customers and staff. The...
Questions
Questions on the website: 13722361