subject
Engineering, 21.03.2020 08:32 gbrightwell

A current of () 100 cos (10kr 45) mA is applied across a parallel connection of a 1.5-kΩ resistor, a 150-mH inductor, and a 0.0667-μF capacitor. Use current division to find the steady-state currents ic(t), iL(t), and iR(t) through each of the three elements. Find the phasor voltage across the parallel connection. Draw a phasor diagram showing V, Ic, IL, and IR. Comment on the results.

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Which of the following ziegler nichols tuning methods the response of the controller to a step input should exhibit an s-shaped curve? a)-open loop mode b)-closed loop mode c)-both modes (open & closed) d)-none of the modes (open & closed)
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
question
Engineering, 04.07.2019 18:10
Awall of 0.5m thickness is to be constructed from a material which has average thermal conductivity of 1.4 w/mk. the wall is to be insulated with a material having an average thermal conductivity of 0.35 w/mk so that heat loss per square meter shall not exceed 1450 w. assume inner wall surface temperature of 1200°c and outer surface temperature of the insulation to be 15°c. calculate the thickness of insulation required.
Answers: 3
You know the right answer?
A current of () 100 cos (10kr 45) mA is applied across a parallel connection of a 1.5-kΩ resistor, a...
Questions
Questions on the website: 13722361