subject
Engineering, 21.03.2020 03:03 miraclejones543

3. A section of highway has vertical and horizontal curves with the same design speed. A vertical curve on this highway connects a 1% and a 3% grade and is 420ft long. If a horizontal curve on this highway is on a two-lane section with 12ft lanes and has a central angle of 37 degrees and a superelevation of 6%, what is the length of the horizontal curve

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 16:10
An electrical motor raises a 50kg load at a construct velencity .calculate the power of the motor, if it takes 40sec to raise the load through a height of 24m(take g =9.8n/g)
Answers: 2
question
Engineering, 04.07.2019 18:10
The higher the astm grain size number, the finer the gran is. a)-true b)-false
Answers: 2
question
Engineering, 04.07.2019 18:10
Compute the pressure drop of 30°c air flowing with a mean velocity of 8 m/s in a circular sheet-metal duct 300 mm in diameter and 15 m long. use a friction factor, f 0.02, and pair = 1.1644 kg/m a. 37.26 pa b. 25.27 pa n c. 29.34 pa d. 30.52 pa
Answers: 1
question
Engineering, 04.07.2019 18:20
Steam enters a converging nozzle at 3.0 mpa and 500°c with a at 1.8 mpa. for a nozzle exit area of 32 cm2, determine the exit velocity, mass flow rate, and exit mach number if the nozzle: negligible velocity, and it exits (a) is isentropic (b) has an efficiency of 94 percent
Answers: 2
You know the right answer?
3. A section of highway has vertical and horizontal curves with the same design speed. A vertical cu...
Questions
question
History, 31.08.2019 18:10
Questions on the website: 13722367