subject
Engineering, 20.03.2020 10:54 atsuedem974

During experiments on laser etching of microchips for IBM, a nuclear engineer places a discshaped sample 5 mm in diameter in a vacuum chamber with surface temperature of 300 K. A 500 mW laser is then used to irradiate the sample uniformly. The sample surface can be considered ‘gray’ with an emissivity of 0.9 and can be considered ‘thin’ so that the disk temperature is uniform. In addition, a non-participating gas at a temperature of 27⁰C is used to cool the sample with a convection coefficient of 50 W/(m2K). Find the steady-state temperature of the disk

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Adouble-strand no. 60 roller chain is used to transmit power between a 13-tooth driving sprocket rotating at 300 rev/min and a 52-tooth driven sprocket. a) what is the allowable horsepower of this drive? b) estimate the center-to-center distance if the chain length is 82 pitches. c) estimate the torque and bending force on the driving shaft by the chain if the actual horsepower transmitted is 30 percent less than the corrected (allowable) power.
Answers: 3
question
Engineering, 04.07.2019 18:10
Calculate the bore of a cylinder that has a stroke of 18 inches and an extension time of 6 seconds at a flow rate of 4 gal/min.
Answers: 3
question
Engineering, 04.07.2019 19:10
What is the major difference between thermoplastics and thermosetting plastics from the polymerization structure point of view?
Answers: 2
question
Engineering, 06.07.2019 03:10
List and describe in sequence the operation process steps for boxf machine?
Answers: 1
You know the right answer?
During experiments on laser etching of microchips for IBM, a nuclear engineer places a discshaped sa...
Questions
question
Mathematics, 17.11.2020 08:50
question
Mathematics, 17.11.2020 08:50
question
Mathematics, 17.11.2020 08:50
question
Mathematics, 17.11.2020 08:50
question
Business, 17.11.2020 08:50
Questions on the website: 13722367