subject
Engineering, 20.03.2020 08:45 milkshakegrande101

. Steam enters an adiabatic turbine at 4 MPa and 500 °C and exits at 50 kPa with a quality of 0.95. If the work output is 500 kW, assuming the surrounding temperature is 50 °C, find: a. The exit temperature of the steam (°C) b. The mass flow rate of air through the device (kg/s) c. The net rate of entropy generation for this process (kW/K)

ansver
Answers: 1

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
Aplate clutch has a single pair of mating friction surfaces 250-mm od by 175-mm id. the mean value of the coefficient of friction is 0.30, and the actuating force is 4 kn. a) find the maximum pressure and the torque capacity using the uniform-wear model. b) find the maximum pressure and the torque capacity using the uniform-pressure model.
Answers: 3
question
Engineering, 04.07.2019 18:10
The filament of an incandescent lamp has a temperature of 2000k. calculate the fraction of radiation emitted in the visible light band if the filament is approximated as blackbody
Answers: 2
question
Engineering, 04.07.2019 18:10
Atmospheric air has a temperature (dry bulb) of 80° f and a wet bulb temperature of 60° f when the barometric pressure is 14.696 psia. determine the specific humidity, grains/lb dry air. a. 11.4 c. 55.8 d. 22.5 b. 44.1
Answers: 1
You know the right answer?
. Steam enters an adiabatic turbine at 4 MPa and 500 °C and exits at 50 kPa with a quality of 0.95....
Questions
question
Mathematics, 07.12.2021 18:50
question
Chemistry, 07.12.2021 18:50
question
Social Studies, 07.12.2021 18:50
Questions on the website: 13722367