Engineering, 19.03.2020 22:57 ryliepeloquinf

An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air is at 95 kPa and 278C, and 750 kJ/kg of heat is transferred to air during the constant-volume heat-addition process. Taking into account the variation of specific heats with temperature, determine (a) the pressure and temperature at the end of the heat- addition process, (b) the net work output, (c) the thermal efficiency, and (d) the mean effective pressure for the cycle

Answers: 2

Show answers

Answers

Answer from: woodfordmaliky

(a). The value of temperature at the end of heat addition process $T_{3}$ = 2042.56 K

(b). The value of pressure at the end of heat addition process $P_{3}$ = 1555.46 k pa

(c). The thermal efficiency of an Otto cycle $E_{otto}$ = 0.4478

(d). The value of mean effective pressure of the cycle $P_{m}$ = 1506.41 $\frac{k pa}{kg}$

Explanation:

Compression ratio $r_{p}$ = 8

Initial pressure $P_{1}$ = 95 k pa

Initial temperature $T_{1}$ = 278 °c = 551 K

Final pressure $P_{2}$ = 8 × $P_{1}$ = 8 × 95 = 760 k pa

Final temperature $T_{2}$ = $T_{1}$ × $r_{p} ^{\frac{\gamma - 1}{\gamma} }$

Final temperature $T_{2}$ = 551 × $8 ^{\frac{1.4 - 1}{1.4} }$

Final temperature $T_{2}$ = 998 K

Heat transferred at constant volume Q = 750 $\frac{KJ}{kg}$

(a). We know that Heat transferred at constant volume $Q_{S}$ = $m C_{v} ( T_{3} - T_{2} )$

⇒ 1 × 0.718 × ( $T_{3}$ - 998 ) = 750

⇒ $T_{3}$ = 2042.56 K

This is the value of temperature at the end of heat addition process.

Since heat addition is constant volume process. so for that process pressure is directly proportional to the temperature.

⇒ P ∝ T

⇒ $\frac{P_{3} }{P_{2} }$ = $\frac{T_{3} }{T_{2} }$

⇒ $P_{3}$ = $\frac{2042.56}{998}$ × 760

⇒ $P_{3}$ = 1555.46 k pa

This is the value of pressure at the end of heat addition process.

(b). Heat rejected from the cycle $Q_{R} = m C_{v} ( T_{4} - T_{1} )$

For the compression and expansion process,

⇒ $\frac{T_{3} }{T_{2} } = \frac{T_{4} }{T_{1} }$

⇒ $\frac{2042.56}{998} = \frac{T_{4} }{551}$

⇒ $T_{4}$ = 1127.7 K

Heat rejected $Q_{R}$ = 1 × 0.718 × ( 1127.7 - 551)

⇒ $Q_{R}$ = 414.07 $\frac{KJ}{kg}$

Net heat interaction from the cycle $Q_{net}$ = $Q_{S}$ - $Q_{R}$

Put the values of $Q_{S}$ & $Q_{R}$ we get,

⇒ $Q_{net}$ = 750 - 414.07

⇒ $Q_{net}$ = 335.93 $\frac{KJ}{kg}$

We know that for a cyclic process net heat interaction is equal to net work transfer.

⇒ $Q_{net}$ = $W_{net}$

⇒ $W_{net}$ = 335.93 $\frac{KJ}{kg}$

This is the net work output from the cycle.

(c). Thermal efficiency of an Otto cycle is given by

$E_{otto} = 1- \frac{T_{1} }{T_{2} }$

Put the values of $T_{1}$ & $T_{2}$ in the above formula we get,

$E_{otto} = 1- \frac{551 }{998 }$

⇒ $E_{otto}$ = 0.4478

This is the thermal efficiency of an Otto cycle.

(d). Mean effective pressure $P_{m}$ :-

We know that mean effective pressure of the Otto cycle is given by

$P_{m}$ = $\frac{W_{net} }{V_{s} }$ ---------- (1)

where $V_{s}$ is the swept volume.

$V_{s}$ = $V_{1} - V_{2}$ ---------- ( 2 )

From ideal gas equation $P_{1}$ $V_{1}$ = m × R × $T_{1}$

Put all the values in above formula we get,

⇒ 95 × $V_{1}$ = 1 × 0.287 × 551

⇒ $V_{1}$ = 0.6 $m^{3}$

From the same ideal gas equation

$P_{2}$ $V_{2}$ = m × R × $T_{2}$

⇒ 760 × $V_{2}$ = 1 × 0.287 × 998

⇒ $V_{2}$ = 0.377 $m^{3}$

Thus swept volume $V_{s}$ = 0.6 - 0.377

⇒ $V_{s}$ = 0.223 $m^{3}$

Thus from equation 1 the mean effective pressure

⇒ $P_{m}$ = $\frac{335.93}{0.223}$

⇒ $P_{m}$ = 1506.41 $\frac{k pa}{kg}$

This is the value of mean effective pressure of the cycle.

Answer from: Quest

jesus loves you

explanation:

Answer from: Quest

answer:

uygtfjyftujtfj

explanation:

Another question on Engineering

Engineering, 03.07.2019 14:10

Line joining liquid phase with liquid and solid phase mixture is known as: a) liquidus b) solidus c) tie line d) none of the mentioned

Answers: 2

Answer

Engineering, 04.07.2019 18:10

Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.

Answers: 1

Answer

Engineering, 04.07.2019 18:20

Modern high speed trains do not have perpendicular expansion gaps where rails are joined end-to-end any more they are mostly welded together but what might happen if there was a spell of particularly hot weather that causes inspection of the tracks?

Answers: 1

Answer

Engineering, 04.07.2019 18:20

For each of the following process: a) sketch the p-v diagram, b)sketch t-s diagram, c) sketch t-v diagram, d) sketch the boundary work on one of the diagrams (a, b or c) and e) sketch the reversible heat transfer on one of the diagrams (a, b or c): 1- isobaric process from compressed liquid to superheated vapor 2- isothermal process from compressed liquid to superheated vapor 3- isentropic process from compressed liquid to superheated vapor

Answers: 3

Answer

You know the right answer?

An ideal Otto cycle has a compression ratio of 8. At the beginning of the compression process, air i...

Questions