subject
Engineering, 19.03.2020 19:26 kimly47

. A turbocharged, three-cylinder, four-stroke cycle, 1.5-liter, multipoint port-injected SI engine using stoichiometric gasoline operates at 2400 RPM with a volumetric efficiency of 88%. The turbocharger has a turbine isentropic efficiency of 80% and a compressor isentropic efficiency of 78%. Exhaust flow enters the turbine at 770 K and 119 kPa, and exits at 98 kPa. Air enters the compressor at 27°C and 96 kPa, and exits at 120 kPa. Calculate: (a) Mass flow rate through the tubocharger compressor. [kg/see] (b) Mass flow rate through the turbocharger turbine. [kg/see] '- (c) Inlet air temperature at turbocharger exit. [0C] (d) Exhaust temperature at turbocharger exit. [0C]

ansver
Answers: 3

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Refrigerant 134a enters an insulated compressor operating at steady state as saturated vapor at -26°c with a volumetric flow rate of 0.18 m3/s. refrigerant exits at 9 bar, 70°c. changes in kinetic and potential energy from inlet to exit can be ignored. determine the volumetric flow rate at the exit, in m3/s, and the compressor power, in kw.
Answers: 1
question
Engineering, 04.07.2019 18:10
Asingle-geared blanking press has a stroke of 200 mm and a rated capacity of 320 kn. a cam driven ram is assumed to be capable of delivering the full press load at constant force during the last 15 percent of a constant-velocity stroke. the camshaft has an average speed of 90 rev/min and is geared to the flywheel shaft at a 6: 1 ratio. the total work done is to include an allowance of 16 percent for friction a) estimate the maximum energy fluctuation b) find the rim weight for an effective diameter of 1.2 m and a coefficient of speed fluctuation of 0.10
Answers: 1
question
Engineering, 04.07.2019 18:10
During a steady flow process, the change of energy with respect to time is zero. a)- true b)- false
Answers: 2
question
Engineering, 04.07.2019 18:10
A-mn has a cubic structure with a0 0.8931 nm and a density of 7.47 g/cm3. b-mn has a different cubic structure, with a0 0.6326 nm and a density of 7.26 g/cm3. the atomic weight of manganese is 54.938 g/mol and the atomic radius is 0.112 nm. determine the percent volume change that would occur if a-mn transforms to b-mn.
Answers: 2
You know the right answer?
. A turbocharged, three-cylinder, four-stroke cycle, 1.5-liter, multipoint port-injected SI engine u...
Questions
question
Mathematics, 16.10.2020 17:01
Questions on the website: 13722367