subject
Engineering, 19.03.2020 02:40 akluke6059

To cool a summer home without using a vapor compression refrigeration cycle, air is routed through a plastic pipe (k=0.15 W/m*K, D_inner=0.15m, D_outer=0.17m) that is submerged in an adjoining body of water. the water temperature is nominally at T_infinity=17 degrees Celsius and has a convection coefficient of h=1500W/m^2*K is maintained at the outer surface of the pipe. If air from the home enters at T_m, i=29 degrees Celsius and a volumetric flow rate of V_i=0.025 m^3/s, what pipe length, L, is needed to provide a discharge temperature of T_m, o=21 degrees Celsius?

ansver
Answers: 2

Another question on Engineering

question
Engineering, 04.07.2019 18:10
Air is to be cooled in the evaporator section of a refrigerator by passing it over a bank of 0.8-cm-outer-diameter and 0.4-m-long tubes inside which the refrigerant is evaporating at -20°c. air approaches the tube bank in the normal direction at 0°c and 1 atm with a mean velocity of 4 m/s. the tubes are arranged in-line with longitudinal and transverse pitches of sl- st 1.5 cm. there are 30 rows in the flow direction with 15 tubes in each row. determine (a) the refrigeration capacity of this system and (b) pressure drop across the tube bank. evaluate the air properties at an assumed mean temperature of -5°c and 1 atm. is this a good assumption?
Answers: 1
question
Engineering, 04.07.2019 18:10
Coiled springs ought to be very strong and stiff. si3n4 is a strong, stiff material. would you select this material for a spring? explain.
Answers: 2
question
Engineering, 04.07.2019 18:10
Afull journal bearing has a journal diameter of 27 mm, with a unilateral tolerance of -0.028 mm. the bushing bore has a diameter of 27.028 mm and a unilateral tolerance of 0.04 mm. the l/d ratio is 0.5. the load is 1.3 kn and the journal runs at 1200 rev/min. if the average viscosity is 50 mpa-s, find the minimum film thickness, the power loss, and the side flow for the minimum clearance assembly.
Answers: 1
question
Engineering, 04.07.2019 18:10
Journeyman training is usually related (clo2) a)-to specific tasks b)-to cost analysis of maintenance task c)-to control process to ensure quality d)-to installation of machinery
Answers: 2
You know the right answer?
To cool a summer home without using a vapor compression refrigeration cycle, air is routed through a...
Questions
question
Mathematics, 02.02.2020 19:59
Questions on the website: 13722367